This document contains important information about this release. Be sure to provide all users with this information before proceeding with the installation.
Note: This document uses the term "Color Profiler Suite" to refer to the Fiery Color Profiler Suite.
After you install and start Color Profiler Suite, if you cannot start any module from the menu selections or from the icons in the main window, run Windows Update, reboot the computer and then restart Color Profiler Suite.
The installation of Color Profiler Suite on Windows Vista takes about 20 minutes, which is longer than with other Windows versions.
If you disconnect the ES-1000 while Color Profiler Suite is running and then connect another ES-1000 that is also licensed for Color Profiler Suite, the main window of Color Profiler Suite shows that it is running in Demo mode. However, the individual modules are running in fully licensed mode.
In Printer Profiler, when you select the settings to print the measurement page, the Print button in the Job Properties window is not active, so you cannot press Enter to print. You must click the Print button.
In Printer Profiler on Mac OS, if you try to set a field in the CMYK Patch Options window or the Edit Black Controls window to its maximum value by dragging a slider all the way to the right, the value displayed is slightly less than the maximum value. You can increase the value to its maximum using the right-arrow key, or you can type the maximum value directly in the field.
If you use Printer Profiler to create a profile for one of the following Fiery controllers and you receive a warning after measuring that the measurements do not match the current calibration, you can ignore the warning and click Continue.
In Device Linker, when you select the settings to print the measurement page, the Print button in the Job Properties window is not active, so you cannot press Enter to print. You must click the Print button.
Monitor Profiler may not perform correctly on certain video hardware, such as chipsets in laptop computers. In these cases, applications that use ICC display profiles directly are not affected, but parts of the operating system user interface may exhibit color casts or other degradation. To avoid this issue, revert to the operating system's monitor calibration feature (such as Apple Display Calibrator Assistant).
Chinese language only: If you use Monitor Profiler to create a new profile for your monitor and set it as the default display profile, Profile Editor does not display the profile name in the lower-left corner of the main Profile Editor window. If you exit Profile Editor and start it again, the profile name is displayed.
When you run Color Profiler Suite on a PowerPC-based Mac, Profile Inspector fails to completely render the profile surface under some conditions when the Display Style is Surface + Points and the point size is less than 1.
Color Verifier cannot open a profile if the file name contains UTF8 characters.
If a job uses a Paper Catalog media that has different output profiles for the front and back sides of a sheet, Color Verification Assistant does not recognize the back side profile and cannot be used to verify the color output of the back side of sheets in the job.
Mac OS only: The URL links on the Help page "Where to get help using Color Profiler Suite" are not active. To follow one of these links, copy the URL, open a browser, and paste the URL into the destination address.